Explainer
How nuclear fission reactors work
A fission reactor splits uranium atoms with neutrons; each split releases energy and more neutrons, which keep a controlled chain reaction going.[1][2] The heat turns water into steam that drives a turbine. Most of the world's reactors are pressurized-water reactors, and US reactors produced 17% of US electricity in 2025.[3][4][5]
A nuclear fission reactor is a controlled way to split heavy atoms and use the heat. Uranium fuel releases energy when its atoms split, a reactor keeps that splitting steady, and the heat makes steam for a turbine.[1][3] Fission plants supplied 17% of US electricity in 2025.[5]
This explainer covers how conventional and next-generation fission reactors work. For smaller factory-built designs, read small modular reactors explained, then the SMR projects tracker. For the other kind of nuclear energy, see how fusion works.
Fission and the chain reaction
Fission happens when a neutron hits a large atom and splits it into two smaller atoms, releasing a lot of energy.[1] Each split also throws off a few more neutrons, and those can split more atoms. This is the chain reaction.[2] Reactors use uranium, and sometimes plutonium, because the reaction is easy to start and control.[6]
A neutron absorbed by a heavy nucleus excites it until it splits into two fission products, releasing energy and additional neutrons.[1][2] Uranium and plutonium are the standard fuels because their fission is easy to initiate and control.[6] For the competing approaches to fusion, see magnetic vs inertial confinement.
Inside the reactor core
Uranium is made into small ceramic pellets and sealed in metal tubes called fuel rods. More than 200 rods are bundled into an assembly, and a core holds a couple of hundred assemblies.[7] Two other parts control the reaction. A moderator slows the neutrons down so they keep splitting atoms. Control rods soak up neutrons: pushing them in slows the reaction, and pulling them out speeds it up.[8] A coolant carries the heat away from the core.[9]
Fuel is ceramic uranium pellets in sealed metal tubes, grouped into assemblies; core size depends on power level.[7] In thermal reactors the moderator slows fission neutrons to sustain the chain reaction, and control rods are inserted or withdrawn to regulate reactivity.[8] In light-water reactors the water moderator is also the primary coolant.[9] Fast reactors work differently: a sodium-cooled fast reactor uses a fast neutron spectrum, so neutrons cause fission without first being slowed.[10]
Reactor types
All US commercial reactors are light-water reactors, which use ordinary water as both coolant and moderator.[11]
In a pressurized-water reactor (PWR), the water in the core is kept under high pressure so it does not boil. It heats a second water loop, which makes the steam.[12] In a boiling water reactor (BWR), the water boils inside the reactor and the steam goes straight to the turbine.[13] Canada’s CANDU reactors use heavy water as moderator, which lets them run on natural, unenriched uranium.[14]
The PWR is the most common type worldwide, with about 300 operable power reactors, and makes up more than 65% of the US fleet.[4][12] Roughly a third of US reactors are BWRs.[13] Pressurized heavy water reactors such as CANDU use natural uranium at 0.7% U-235, which needs a more efficient moderator, heavy water.[14] CANDU fuel sits in pressure tubes rather than one large vessel, so units can be refuelled while operating.[15] Heavy-water reactors such as CANDU are also the main source of civilian tritium, a fusion fuel.[16]
Generation IV designs are being developed through a cooperation of 14 countries.[17] Most are still in development. They tend to use closed fuel cycles that burn long-lived actinides, and four or five of the seven international designs are fast reactors.[18] Very high temperature reactors are cooled by gas, and molten salt reactors use molten fluoride or chloride salts as coolant.[19]
Fuel: LEU and HALEU
Today’s US fleet runs on uranium enriched up to 5% in uranium-235.[20] High-assay low-enriched uranium (HALEU) is enriched to between 5% and less than 20%. Most US advanced reactor designs need it to get more power from a smaller core.[21] The Department of Energy estimates US demand for HALEU could reach 50 metric tons a year by 2035.[22] Supply is thin. According to the World Nuclear Association, more than half of SMR designs in development will need HALEU, and only Russia and China can currently produce it at scale.[23]
Waste and safety systems
Commercial fuel goes into the reactor as solid ceramic uranium oxide pellets and comes out solid.[24] The United States produces about 2,000 metric tons a year and has accumulated about 90,000 metric tons since the 1950s.[25] It is kept first in water pools and then in steel and concrete dry casks, at more than 70 sites in 35 states.[26] More than 90% of its potential energy remains after five years in a reactor. The United States does not recycle spent fuel, but France does.[27]
Reactor safety rests on defence in depth: several safety systems with backups, and a series of physical barriers between the core and the environment.[28] Besides control rods, the main engineered provision is a back-up emergency core cooling system.[29] Cooling matters even after shutdown. At Three Mile Island and Fukushima the problems began after the reactors had stopped, because decay heat was not removed and the cores began to melt within hours.[30] All modern plants sit inside a containment structure, which the World Nuclear Association says still held back most radioactivity when one Fukushima containment was ruptured.[31] Newer designs add passive safety, which relies on convection, gravity or resistance to high temperatures instead of pumps and other engineered components.[32]
Read next
SMR projects tracker: 2025-26 licences, contracts and construction
Dated milestones for small modular reactors to 7 November 2026: Darlington, Clinch River, Natrium, Long Mott, Wylfa, Linglong One and big-tech deals.
Questions readers ask
What is a nuclear chain reaction?
When a neutron splits a uranium atom, the split releases energy and additional neutrons. Those neutrons can split more atoms, which keeps the reaction going.[1][2]
What does a moderator do?
A moderator slows down the neutrons produced by fission so they can sustain the chain reaction. In US reactors ordinary water serves as both moderator and coolant.[8][11]
What is the difference between a PWR and a BWR?
A pressurized-water reactor keeps its core water under high pressure so it does not boil and makes steam in a separate loop. A boiling water reactor makes steam directly inside the reactor vessel.[12][13]
What is HALEU?
High-assay low-enriched uranium is enriched to between 5% and less than 20% uranium-235, compared with up to 5% for today's US fleet. Most US advanced reactor designs need it.[21][20]
Is spent nuclear fuel a liquid?
No. Commercial fuel is made of solid ceramic uranium oxide pellets, and it is still solid when it comes out of the reactor. It is stored first in water pools and later in steel and concrete dry casks.[24][26]
Why do reactors still need cooling after they shut down?
The fuel keeps producing decay heat after the chain reaction stops. At Three Mile Island and Fukushima the problems began after shutdown, when that heat was not removed.[30]
Sources
· 32 claims from 3 publishers
Each numbered claim is a statement we checked against the sources listed with it. Tap a number in the text to see its sources in place.
- [1]
Fission happens when a neutron strikes a large atom and splits it into two smaller atoms, called fission products, releasing a large amount of energy. confirmedas of 2026-11-07
- Fission and Fusion: What is the Difference? · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- Fission and Fusion: What is the Difference? · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- [2]
Each fission also releases additional neutrons, which can go on to split more atoms in a chain reaction. confirmedas of 2026-11-07
- Fission and Fusion: What is the Difference? · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- [3]
In a power reactor, the heat from fission turns water into steam, which spins a turbine to generate electricity. confirmedas of 2025-05-01
- NUCLEAR 101: How Does a Nuclear Reactor Work? · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- [4]
According to the World Nuclear Association, the PWR is the most common reactor type worldwide, with about 300 operable power reactors and several hundred more used for naval propulsion. reportedas of 2026-08-05
- Nuclear Power Reactors (updated 5 August 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- [5]
US reactors produced 818 TWh in 2025, 17% of US electricity and about 30% of the world's nuclear generation. reportedas of 2026-11-04
- Nuclear Power in the USA (updated 4 November 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- Nuclear Power in the USA (updated 4 November 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- [6]
Power reactors most commonly use uranium and plutonium for fission because the reactions are easy to initiate and control. confirmedas of 2026-11-07
- Fission and Fusion: What is the Difference? · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- [7]
Reactor uranium is made into small ceramic pellets stacked in sealed metal tubes called fuel rods; typically more than 200 rods form a fuel assembly, and a core holds a couple of hundred assemblies. confirmedas of 2025-05-01
- NUCLEAR 101: How Does a Nuclear Reactor Work? · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- NUCLEAR 101: How Does a Nuclear Reactor Work? · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- [8]
A moderator slows the neutrons produced by fission so the chain reaction can continue, and control rods are inserted into the core to slow the reaction or withdrawn to speed it up. confirmedas of 2025-05-01
- NUCLEAR 101: How Does a Nuclear Reactor Work? · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- [9]
A coolant is a fluid circulated through the reactor core to carry heat away; in light-water reactors the water moderator is also the primary coolant. reportedas of 2026-08-05
- Nuclear Power Reactors (updated 5 August 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- [10]
A sodium-cooled fast reactor uses liquid sodium instead of water as coolant and a fast neutron spectrum, so neutrons cause fission without first being slowed down. confirmedas of 2021-04-12
- 3 Advanced Reactor Systems to Watch by 2030 · US Department of Energy, Office of Nuclear Energy · Primary source · 2021-04-12 (retrieved 2026-11-07)
- 3 Advanced Reactor Systems to Watch by 2030 · US Department of Energy, Office of Nuclear Energy · Primary source · 2021-04-12 (retrieved 2026-11-07)
- [11]
All commercial nuclear reactors in the United States are light-water reactors, which use ordinary water as both coolant and neutron moderator. confirmedas of 2025-05-01
- NUCLEAR 101: How Does a Nuclear Reactor Work? · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- [12]
More than 65% of US commercial reactors are pressurized-water reactors (PWRs), which keep core water under high pressure so it does not boil and use it to heat a separate water supply into steam in a heat exchanger. confirmedas of 2025-05-01
- NUCLEAR 101: How Does a Nuclear Reactor Work? · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- NUCLEAR 101: How Does a Nuclear Reactor Work? · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- [13]
Roughly a third of US operating reactors are boiling water reactors (BWRs), which produce steam directly inside the reactor vessel and pipe it straight to the turbine. confirmedas of 2025-05-01
- NUCLEAR 101: How Does a Nuclear Reactor Work? · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- NUCLEAR 101: How Does a Nuclear Reactor Work? · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- [14]
Pressurized heavy water reactors (PHWRs), the type that includes Canada's CANDU, generally use natural uranium containing 0.7% U-235 and therefore need a more efficient moderator, heavy water. reportedas of 2026-08-05
- Nuclear Power Reactors (updated 5 August 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- [15]
CANDU reactors hold their fuel in pressure tubes rather than one large pressure vessel, so they can be refuelled while operating. reportedas of 2026-08-05
- Nuclear Power Reactors (updated 5 August 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- [16]
Today's civilian tritium comes mainly from heavy-water fission reactors such as Canada's CANDU units, with an estimated 20 to 30 kilograms available. reportedas of 2024-05-20
- The fusion industry must rise to its tritium challenge · Physics World · Secondary source · 2024-05-20 (retrieved 2026-10-10)
- [17]
Generation IV reactors are being developed through an international cooperation of 14 countries, including the United States. confirmedas of 2021-04-12
- 3 Advanced Reactor Systems to Watch by 2030 · US Department of Energy, Office of Nuclear Energy · Primary source · 2021-04-12 (retrieved 2026-11-07)
- [18]
Generation IV reactor designs are still mostly in development; they tend to have closed fuel cycles that burn long-lived actinides, and four or five of the seven internationally developed designs are fast neutron reactors. reportedas of 2026-08-05
- Nuclear Power Reactors (updated 5 August 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- Nuclear Power Reactors (updated 5 August 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- [19]
Very high temperature reactors are cooled by flowing gas, and molten salt reactors use molten fluoride or chloride salts as coolant. confirmedas of 2021-04-12
- 3 Advanced Reactor Systems to Watch by 2030 · US Department of Energy, Office of Nuclear Energy · Primary source · 2021-04-12 (retrieved 2026-11-07)
- 3 Advanced Reactor Systems to Watch by 2030 · US Department of Energy, Office of Nuclear Energy · Primary source · 2021-04-12 (retrieved 2026-11-07)
- [20]
The existing US reactor fleet runs on uranium fuel enriched up to 5% in uranium-235, the main fissile isotope. confirmedas of 2024-12-03
- What is High-Assay Low-Enriched Uranium (HALEU)? · US Department of Energy, Office of Nuclear Energy · Primary source · 2024-12-03 (retrieved 2026-11-07)
- [21]
High-assay low-enriched uranium (HALEU) is enriched to between 5% and less than 20% U-235, and most US advanced reactor designs need it to get more power from a smaller core. confirmedas of 2024-12-03
- What is High-Assay Low-Enriched Uranium (HALEU)? · US Department of Energy, Office of Nuclear Energy · Primary source · 2024-12-03 (retrieved 2026-11-07)
- [22]
The US Department of Energy estimates that domestic HALEU demand could reach 50 metric tons a year by 2035. confirmedas of 2024-12-03· forecast
- What is High-Assay Low-Enriched Uranium (HALEU)? · US Department of Energy, Office of Nuclear Energy · Primary source · 2024-12-03 (retrieved 2026-11-07)
- [23]
According to the World Nuclear Association, more than half of SMR designs in development will need HALEU, and only Russia and China currently have the infrastructure to produce it at scale. reportedas of 2026-10-23
- Small Modular Reactors (updated 23 October 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- Small Modular Reactors (updated 23 October 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- [24]
Commercial spent nuclear fuel is a solid; it goes into the reactor as ceramic uranium oxide pellets and comes out in the same solid form. confirmedas of 2026-11-07
- 5 Fast Facts about Spent Nuclear Fuel · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- 5 Fast Facts about Spent Nuclear Fuel · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- [25]
The United States generates about 2,000 metric tons of spent fuel a year and has accumulated about 90,000 metric tons since the 1950s. confirmedas of 2026-11-07
- 5 Fast Facts about Spent Nuclear Fuel · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- 5 Fast Facts about Spent Nuclear Fuel · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- [26]
US spent fuel is first stored in steel-lined concrete pools of water, then moved to dry casks of steel and concrete, at more than 70 sites in 35 states. confirmedas of 2026-11-07
- 5 Fast Facts about Spent Nuclear Fuel · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- 5 Fast Facts about Spent Nuclear Fuel · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- 5 Fast Facts about Spent Nuclear Fuel · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- [27]
More than 90% of the potential energy remains in spent fuel after five years in a reactor; the United States does not currently recycle spent fuel, but France does. confirmedas of 2026-11-07
- 5 Fast Facts about Spent Nuclear Fuel · US Department of Energy, Office of Nuclear Energy · Primary source (retrieved 2026-11-07)
- [28]
Nuclear plants use a defence-in-depth approach, with multiple safety systems and a series of physical barriers between the radioactive core and the environment. reportedas of 2026-05-27
- Safety of Nuclear Power Reactors (updated 27 May 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- Safety of Nuclear Power Reactors (updated 27 May 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- [29]
Beyond the control rods that absorb neutrons, the main engineered safety provision is a back-up emergency core cooling system. reportedas of 2026-05-27
- Safety of Nuclear Power Reactors (updated 27 May 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- [30]
At Three Mile Island and Fukushima the problems began after the reactors had shut down, because decay heat from the fuel was not removed and core melting began within hours. reportedas of 2026-05-27
- Safety of Nuclear Power Reactors (updated 27 May 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- Safety of Nuclear Power Reactors (updated 27 May 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- [31]
All modern nuclear plants are surrounded by a containment structure, which the World Nuclear Association says remains effective at preventing the escape of most radioactivity even when ruptured, as at one Fukushima reactor. reportedas of 2026-05-27
- Safety of Nuclear Power Reactors (updated 27 May 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
- [32]
Passive safety designs rely only on physical phenomena such as convection, gravity or resistance to high temperatures, not on engineered components working. reportedas of 2026-05-27
- Safety of Nuclear Power Reactors (updated 27 May 2026) · World Nuclear Association · Secondary source (retrieved 2026-11-07)
Revision history (1)
- Page created.
Created Nov 7, 2026. Last reviewed by an editor on Nov 8, 2026. Next scheduled review: Apr 7, 2027.
Cite this page
"How nuclear fission reactors work." ContentLora, updated Nov 7, 2026. https://contentlora.com/explain/how-nuclear-fission-reactors-work
Spotted an error? Suggest a correction or emailcorrections@contentlora.com.