Skip to content
ContentLora

    Tip: press / anywhere to search.

    Explainer

    How aircraft are certified: type certificates and delegation

    The FAA approves a new aircraft design with a type certificate, issued once the applicant shows with designs, tests and calculations that it meets the rules and the FAA agrees after its own tests and inspections.[1] Production then runs under an approved quality system, and each new aircraft gets an airworthiness certificate.[2][3] Much of the work is delegated: an Organization Designation Authorization (ODA) lets a manufacturer's unit act on the FAA's behalf, and nearly every US holder of a transport-category airplane type certificate holds one.[4][5]

    Editor reviewedUpdated Explainer17 claims · 100% primaryAviation and air travel, Tech policy

    This explainer covers US certification under 14 CFR Part 21 and related FAA practice. Other regulators, such as the European Union Aviation Safety Agency, run their own processes. FAA web pages on certification block scripted fetching, so this page relies on the regulations themselves and Federal Register documents.

    Three certificates

    US aircraft approval rests on three kinds of certificate in 14 CFR Part 21.

    Type certificate (the design). An applicant is entitled to a type certificate after submitting the type design, test reports and computations showing the product meets the applicable airworthiness, noise, fuel venting, emissions and fuel efficiency requirements, and after the FAA finds that it does on completing its own tests and inspections.[1] The type design itself is the set of drawings and specifications that define the product’s configuration and design features.[6] Before required flight tests, the applicant must show it meets the structural requirements, has completed ground inspections and tests, and that the aircraft conforms to the type design.[7] A type certificate stays in effect until it is surrendered, suspended or revoked, or the FAA sets an end date.[8]

    Production certificate (the factory). A production certificate holder must have a written quality system ensuring every product conforms to its approved design and is in condition for safe operation.[2]

    Airworthiness certificate (each aircraft). A new aircraft built under a production certificate is entitled to a standard airworthiness certificate without further showing, though the FAA may inspect it for conformity to the type design.[3]

    Changing an approved design

    For a major change to an existing design that does not require a new type certificate, the type certificate holder applies either for a supplemental type certificate (STC) or to amend the original type certificate; anyone else must apply for an STC.[9] The Boeing 737 MAX 10 shows how this works: on 20 October 2026 the FAA issued an amended type certificate and production approval after requiring flight-control updates, including an enhanced angle-of-attack sensor.[10]

    Delegation to manufacturers

    The FAA does not do all of this work itself. Its designees can be individuals or organisations.[5] An Organization Designation Authorization lets an organisation perform specified engineering, manufacturing, operations, airworthiness or maintenance functions on the FAA Administrator’s behalf.[4] Nearly every US holder of a transport-category airplane type certificate also holds an ODA.[5] The FAA’s procedures are set out in Order 8110.4C for type certification and Order 8100.15B for ODA holders.[11]

    Boeing’s ODA lets an independent unit inside the company perform certain functions for the FAA. In May 2025 the FAA renewed it for three years from 1 June 2025.[12]

    Lessons from the 737 MAX

    The two 737 MAX crashes put certification under scrutiny. In 2019 the NTSB found that the accident pilots’ responses to unintended activation of the MCAS flight-control function did not match the assumptions about pilot recognition and response that Boeing had used, based on FAA guidance, in its safety assessment. It said the process needed improvement because it was still being used to certify new designs.[13]

    Congress passed the Aircraft Certification, Safety, and Accountability Act in December 2020, and the FAA says information from the MAX accidents and investigations was pertinent to its requirements.[14] In January 2024 the FAA proposed a rule under it that would require applicants for and holders of transport-airplane type certificates to submit, and keep disclosing, safety-critical information to the FAA, and all type-certificate applicants to file a certification plan.[15] The initial safety-critical submission would go to the FAA itself, not to a designee.[16]

    Recent changes

    In June 2026 the FAA proposed a rule to make certification of transport-category airplanes faster and simpler and to align its approach more closely with the European Union Aviation Safety Agency.[17] For the engine technology itself, see how jet engines work. The agency’s wider role is described on the FAA page.

    Next in the crash course

    Boeing

    Boeing builds commercial jets, military aircraft and space systems. Its segments, 737 MAX production under FAA oversight, deliveries and 2026 results.

    More in Aviation

    Questions readers ask

    What is a type certificate?

    The FAA's approval of a product's design. An applicant gets one by submitting the type design, test reports and computations showing the product meets the applicable airworthiness, noise, fuel venting, emissions and fuel efficiency requirements, once the FAA has done its own tests and inspections.[1]

    Does each new plane off the production line need approval?

    Yes. A production certificate holder must run a written quality system that ensures each product conforms to its approved design. A new aircraft built under a production certificate is then entitled to a standard airworthiness certificate, though the FAA may inspect it.[2][3]

    What is ODA?

    Organization Designation Authorization lets an organisation perform specified engineering, manufacturing, airworthiness and other functions on the FAA's behalf. Nearly every US holder of a transport-category airplane type certificate also holds an ODA. The FAA renewed Boeing's ODA for three years from June 2025.[4][5][12]

    How long does a type certificate last?

    Until it is surrendered, suspended or revoked, or the FAA sets a termination date.[8]

    What changed after the 737 MAX crashes?

    Congress passed the Aircraft Certification, Safety, and Accountability Act in December 2020. In January 2024 the FAA proposed a rule under it that would require applicants for and holders of transport-airplane type certificates to disclose safety-critical information, with the initial submission going to the FAA itself, and all type-certificate applicants to submit a certification plan.[14][15][16]

    Is a derivative model like the 737 MAX 10 certified from scratch?

    Not necessarily. Changes to an existing design can be approved through an amended type certificate. The FAA certified the 737 MAX 10 in October 2026 by issuing an amended type certificate and production approval.[9][10]

    Sources

    · 17 claims from 4 publishers

    Each numbered claim is a statement we checked against the sources listed with it. Tap a number in the text to see its sources in place.

    1. [1]

      Under 14 CFR 21.21, an applicant is entitled to a type certificate after submitting the type design, test reports and computations showing the product meets the applicable airworthiness, noise, fuel venting, emissions and fuel efficiency requirements, and the FAA finds that it does after its own tests and inspections. confirmedas of 2026-11-07

    2. [2]

      A production certificate holder must have a written quality system ensuring each product conforms to its approved design and is in condition for safe operation. confirmedas of 2026-11-07

    3. [3]

      A new aircraft built under a production certificate is entitled to a standard airworthiness certificate without further showing, though the FAA may inspect it for conformity to the type design. confirmedas of 2026-11-07

    4. [4]

      An Organization Designation Authorization (ODA) lets an organisation perform specified engineering, manufacturing, operations, airworthiness or maintenance functions on the FAA Administrator's behalf. confirmedas of 2026-11-07

    5. [5]

      FAA designees can be individuals or organisations, and nearly every US holder of a transport-category airplane type certificate also holds an ODA. confirmedas of 2024-01-25

    6. [6]

      A type design consists of the drawings and specifications that define a product's configuration and design features, plus information on dimensions, materials and processes that define its structural strength. confirmedas of 2026-11-07

    7. [7]

      Before required flight tests, an applicant for an aircraft type certificate must show compliance with structural requirements, completion of ground inspections and tests, and that the aircraft conforms to the type design. confirmedas of 2026-11-07

    8. [8]

      A type certificate stays in effect until it is surrendered, suspended or revoked or the FAA sets a termination date. confirmedas of 2026-11-07

    9. [9]

      For a major change to a type design that does not need a new type certificate, the type certificate holder must apply either for a supplemental type certificate (STC) or to amend the original type certificate, and anyone else must apply for an STC. confirmedas of 2026-11-07

    10. [10]

      On October 20, 2026 the FAA certified the Boeing 737 MAX-10, issuing an amended type certificate and production approval, after requiring flight-control updates including an enhanced angle-of-attack sensor. confirmedas of 2026-10-20

    11. [11]

      FAA Order 8110.4C sets out type certification procedures for applicants, and Order 8100.15B covers ODA procedures. confirmedas of 2024-01-25

    12. [12]

      In May 2025 the FAA renewed Boeing's Organization Designation Authorization, which lets an independent unit within Boeing perform certain functions on the FAA's behalf, for three years from 1 June 2025. confirmedas of 2025-05-29

      • General Statements · Federal Aviation Administration · Primary source (retrieved 2026-11-07)
      • General Statements · Federal Aviation Administration · Primary source (retrieved 2026-11-07)
    13. [13]

      In September 2019 the NTSB said the accident pilots' responses to unintended MCAS operation were not consistent with the assumptions about pilot recognition and response that Boeing used, based on FAA guidance, in its safety assessment; it said the evaluation process needed improvement because it was still used to certify new designs, and issued recommendations to the FAA on how such safety assessments account for pilot responses. confirmedas of 2019-09-19

    14. [14]

      Congress passed the Aircraft Certification, Safety, and Accountability Act on 21 December 2020 as part of the Consolidated Appropriations Act, 2021; the FAA says information from the 737 MAX accidents and the investigations that followed was pertinent to its requirements. confirmedas of 2024-01-25

    15. [15]

      In January 2024 the FAA proposed a rule implementing the Aircraft Certification, Safety, and Accountability Act of 2020 that would require applicants for and holders of transport-airplane type certificates to submit and keep disclosing safety-critical information to the FAA, and all type-certificate applicants to submit a certification plan. confirmedas of 2024-01-25

    16. [16]

      The proposal says the initial submission of safety-critical information would go to the FAA itself, not to an individual or organisational designee. confirmedas of 2024-01-25

    17. [17]

      In June 2026 the FAA proposed a rule to make certification of transport-category airplanes faster and simpler and to align its approach more closely with the European Union Aviation Safety Agency's standards. confirmedas of 2026-06-26

      • General Statements · Federal Aviation Administration · Primary source · June 26, 2026: FAA Issues Proposed Rule to Streamline Transport-Category Airplane Certification (retrieved 2026-11-07)
      • General Statements · Federal Aviation Administration · Primary source · June 26, 2026 (retrieved 2026-11-07)
    Revision history (1)
    1. Page created.

    Created Nov 7, 2026. Last reviewed by an editor on Nov 8, 2026. Next scheduled review: May 7, 2027.

    Cite this page

    "How aircraft are certified: type certificates and delegation." ContentLora, updated Nov 7, 2026. https://contentlora.com/explain/how-aircraft-are-certified

    Spotted an error? Suggest a correction or emailcorrections@contentlora.com.