Skip to content
ContentLora

    Tip: press / anywhere to search.

    Explainer

    How new elements are discovered and named

    New elements are made by firing a beam of nuclei at a target in an accelerator, and it can take trillions of interactions before two nuclei fuse.[1] A joint IUPAC/IUPAP working party checks each discovery claim against agreed criteria; in 2015 it confirmed elements 113, 115, 117 and 118, completing the periodic table's seventh row.[2] Only the discoverers may propose a name, which IUPAC reviews publicly for five months before approving, as it did for nihonium, moscovium, tennessine and oganesson in 2016.[3][4]

    Editor reviewedUpdated Explainer18 claims · 100% primaryScience, Physics

    The newest elements on the periodic table are made in accelerators, sometimes just a few atoms at a time.[1][5] Turning that work into a named square on the table takes two separate steps: an independent check of the discovery, and a naming process run by the International Union of Pure and Applied Chemistry (IUPAC).[2][6]

    Making a superheavy element

    Superheavy elements are made by firing a beam of nuclei at a target in an accelerator. Berkeley Lab says it can take trillions of interactions before two nuclei fuse.[1] Elements 114 to 118 were all made with a calcium-48 beam, whose “magic” arrangement of protons and neutrons helps it fuse with target nuclei. Element 120, however, needs a beam with 22 protons: titanium.[7]

    In July 2024 Berkeley Lab reported making two atoms of element 116, livermorium, with a titanium-50 beam over 22 days at its 88-Inch Cyclotron, as a step toward trying for element 120.[5] Its researchers estimated that element 120 would take about ten times longer to make than element 116. If discovered, it would be the heaviest atom created and the first element on the periodic table’s eighth row.[8]

    Identifying the atoms is hard (for decay in general, see radioactivity and half-life). The working party that confirmed elements 113 to 118 noted that new superheavy elements decay into previously unknown isotopes of slightly lighter elements, which must also be identified unequivocally.[9]

    Checking the claim

    Discovery claims are judged by a joint working party of IUPAC and the International Union of Pure and Applied Physics (IUPAP). On 30 December 2015 IUPAC announced that the working party had reviewed the published evidence and ruled that claims for elements 113, 115, 117 and 118 met the discovery criteria set in 1991, completing the seventh row of the periodic table.[2]

    IUPAC credited element 113 to the RIKEN collaboration in Japan; elements 115 and 117 to a collaboration of the Joint Institute for Nuclear Research in Dubna with Lawrence Livermore and Oak Ridge national laboratories; and element 118 to Dubna and Lawrence Livermore.[10] Element 113 was the first element discovered in an Asian country.[11]

    In 2016 IUPAC said it and IUPAP were setting up a new joint working group to look again at the criteria for verifying new elements, as searches continued beyond the seventh row.[12]

    Temporary names

    Until a permanent name is agreed, a new element carries a temporary systematic name and three-letter symbol, such as ununtrium (Uut) for element 113 and ununoctium (Uuo) for element 118.[13]

    The naming rules

    Once a discovery is verified, the discoverers propose a name and a two-letter symbol. IUPAC’s Inorganic Chemistry Division checks the proposal for consistency, translatability and prior use; it then goes out for five months of public review, after which IUPAC makes the final decision.[6] In 2016 the IUPAC Bureau gave that approval.[4]

    IUPAC’s guidelines allow a new element to be named after:

    • a mythological concept or character, including an astronomical object
    • a mineral or similar substance
    • a place or geographical region
    • a property of the element
    • a scientist.[14]

    Names end in “-ium” for elements in groups 1 to 16, “-ine” for group 17 and “-on” for group 18, and the English name should translate properly into other major languages.[15] During the 2016 review IUPAC received petitions for other names but did not accept them, because under its guidelines only the discoverers have the right to propose names and symbols.[3]

    The 2016 names

    On 28 November 2016, after the five-month public review, IUPAC approved four names:[4]

    ElementName and symbolOrigin
    113Nihonium (Nh)Nihon, a Japanese name for Japan
    115Moscovium (Mc)The Moscow region, home of the Dubna institute
    117Tennessine (Ts)The Tennessee region’s superheavy-element research
    118Oganesson (Og)Physicist Yuri Oganessian

    The origins are as IUPAC described them.[16] Some chemists objected that Ts is also an abbreviation for the tosyl group in chemistry. IUPAC concluded that context makes the meaning clear, as it does for other shared symbols such as Ac and Pr.[17]

    As of July 2024, 118 elements were known, and Berkeley Lab scientists are credited with discovering 16 of them.[18]

    Next in the crash course

    How lasers work

    How a laser turns stored energy into a narrow beam of single-colour light: stimulated emission, the mirror cavity, coherence, safety classes and uses.

    Developing in Science & Energy

    Questions readers ask

    Who decides the name of a new element?

    The discoverers propose a name and symbol, and IUPAC makes the final decision after checking the proposal and holding a five-month public review. Only the discoverers have the right to propose names.[6][3]

    What can an element be named after?

    Under IUPAC's guidelines, a mythological concept or character (including an astronomical object), a mineral or similar substance, a place or region, a property of the element, or a scientist.[14]

    Why do element names end in -ium?

    IUPAC's rules say names end in "-ium" for elements in groups 1 to 16, "-ine" for group 17 and "-on" for group 18, which is why element 117 is tennessine and element 118 is oganesson.[15][4]

    What were the most recent elements named?

    On 28 November 2016 IUPAC approved nihonium (Nh), moscovium (Mc), tennessine (Ts) and oganesson (Og) for elements 113, 115, 117 and 118.[4]

    How many elements are known?

    As of July 2024, 118 elements were known. Researchers at Berkeley Lab are working toward element 120, which would be the first on the periodic table's eighth row.[18][8]

    What names do elements have before they are officially named?

    Temporary systematic names and three-letter symbols based on the atomic number, such as ununtrium (Uut) for element 113 and ununoctium (Uuo) for element 118.[13]

    Sources

    · 18 claims from 2 publishers

    Each numbered claim is a statement we checked against the sources listed with it. Tap a number in the text to see its sources in place.

    1. [1]

      Superheavy elements are made by firing a beam of nuclei at a target in an accelerator, and Berkeley Lab says it can take trillions of interactions before two nuclei fuse. confirmedas of 2024-07-23

    2. [2]

      On 30 December 2015 IUPAC announced that a joint IUPAC/IUPAP working party had reviewed the published evidence and ruled that discovery claims for elements 113, 115, 117 and 118 met the 1991 discovery criteria, completing the seventh row of the periodic table. confirmedas of 2015-12-30

    3. [3]

      During the 2016 review IUPAC received petitions proposing other names but did not accept them, because under its guidelines only the discoverers have the right to propose names and symbols. confirmedas of 2016-11-30

    4. [4]

      On 28 November 2016 IUPAC approved the names nihonium (Nh), moscovium (Mc), tennessine (Ts) and oganesson (Og) for elements 113, 115, 117 and 118 after a five-month public review. confirmedas of 2016-11-30

    5. [5]

      In July 2024 Berkeley Lab reported making two atoms of element 116, livermorium, with a titanium-50 beam over 22 days at its 88-Inch Cyclotron, a step toward attempting element 120. confirmedas of 2024-07-23

    6. [6]

      After discovery is verified, the discoverers propose a name and two-letter symbol, IUPAC's Inorganic Chemistry Division checks it for consistency, translatability and prior use, it goes to a five-month public review, and IUPAC then makes the final decision. confirmedas of 2015-12-30

    7. [7]

      Elements 114 to 118 had all been made with a calcium-48 beam, whose "magic" arrangement of protons and neutrons helps it fuse with target nuclei, but making element 120 requires a beam with 22 protons, titanium. confirmedas of 2024-07-23

    8. [8]

      Berkeley Lab researchers estimated element 120 would take about ten times longer to make than element 116; if discovered, it would be the heaviest atom created and the first on the periodic table's eighth row. reportedas of 2024-07-23· forecast

    9. [9]

      The working party's chair said a particular difficulty is that new superheavy elements decay into previously unknown isotopes of slightly lighter elements, which must also be identified unequivocally. confirmedas of 2015-12-30

    10. [10]

      IUPAC credited element 113 to the RIKEN collaboration in Japan, elements 115 and 117 to a collaboration of the Joint Institute for Nuclear Research in Dubna with Lawrence Livermore and Oak Ridge national laboratories, and element 118 to Dubna and Lawrence Livermore. confirmedas of 2015-12-30

    11. [11]

      Element 113, nihonium, was the first element discovered in an Asian country. confirmedas of 2016-06-08

    12. [12]

      In 2016 IUPAC said it and IUPAP were setting up a new joint working group to examine the criteria used to verify claims of new elements, as searches continued beyond the seventh row. confirmedas of 2016-11-30

    13. [13]

      Before permanent names are agreed, new elements carry temporary systematic names and three-letter symbols, such as ununtrium (Uut) for element 113 and ununoctium (Uuo) for element 118. confirmedas of 2015-12-30

    14. [14]

      Under IUPAC's naming guidelines, a new element can be named after a mythological concept or character (including an astronomical object), a mineral or similar substance, a place or geographical region, a property of the element, or a scientist. confirmedas of 2016-06-08

    15. [15]

      Element names end in "-ium" for groups 1 to 16, "-ine" for group 17 and "-on" for group 18, and English names should translate properly into other major languages. confirmedas of 2016-06-08

    16. [16]

      Nihonium comes from Nihon, a Japanese name for Japan; moscovium honours the Moscow region, home of the Dubna institute; tennessine recognises the Tennessee region's superheavy-element research; and oganesson honours physicist Yuri Oganessian. confirmedas of 2016-11-30

    17. [17]

      Some chemists objected that Ts is also an abbreviation for the tosyl group, but IUPAC concluded that context makes the meaning clear, as with other shared symbols such as Ac and Pr. confirmedas of 2016-11-30

    18. [18]

      As of July 2024, 118 elements were known, and Berkeley Lab scientists are credited with discovering 16 of them. confirmedas of 2024-07-23

    Revision history (1)
    1. Page created.

    Created Nov 8, 2026. Last reviewed by an editor on Nov 8, 2026. Next scheduled review: Feb 8, 2027.

    Cite this page

    "How new elements are discovered and named." ContentLora, updated Nov 8, 2026. https://contentlora.com/explain/how-new-elements-are-named

    Spotted an error? Suggest a correction or emailcorrections@contentlora.com.