Skip to content
ContentLora

    Tip: press / anywhere to search.

    Explainer

    How lasers work

    Laser stands for light amplification by the stimulated emission of radiation.[1] Energy lifts electrons in a gain medium to a higher state, and a photon of the right energy stimulates them to release identical photons, which mirrors bounce back and forth until a beam escapes.[2][3][4] The result is coherent light, one wavelength travelling in one direction, which stays narrow and intense over long distances.[5]

    Editor reviewedUpdated Explainer20 claims · 100% primaryPhysics

    Laser stands for light amplification by the stimulated emission of radiation.[1] The US Food and Drug Administration (FDA) describes a laser as a device that stores energy from a source, such as an electrical discharge, a chemical reaction or intense light, and releases it as light.[6] The first laser was demonstrated in 1960.[7]

    This page explains how lasers work. It is not safety guidance.

    Excited electrons and stimulated emission

    A laser starts with a gain medium, a material such as glass, crystal or gas. Its electrons absorb energy and jump to a higher-energy state. When they drop back, either on their own or when stimulated by light, they emit photons.[2]

    The key step is stimulation. A photon tuned to the excited electrons’ energy makes them emit photons of exactly the same wavelength, producing large numbers of photons with the same wavelength and direction.[3] The colour, or wavelength, of the light is set by how much energy an excited electron releases when it drops to a lower level.[8] Laser light need not be visible: lasers can also produce invisible ultraviolet or infrared radiation.[9]

    Like most large lasers, the National Ignition Facility (NIF) uses intense flashes of white light from flashlamps to pump electrons in slabs of laser glass into a higher-energy state that lasts about a millionth of a second.[10]

    The mirror cavity

    Mirrors at each end of the gain medium bounce photons back and forth. Each pass stimulates more identical photons, until the light is strong enough to leave through a partially reflective mirror as a beam.[4]

    Some lasers, such as ruby lasers, emit short pulses. Others, such as helium-neon gas lasers and liquid dye lasers, emit light continuously.[11]

    Why laser light is special

    Ordinary light mixes many wavelengths travelling in different directions. Laser light is coherent: its photons have the same wavelength and move in the same direction, which lets a beam stay narrow and intense over long distances.[5]

    Lasers have many everyday uses. The FDA lists optical disc players, bar code readers, printers and copiers, laser pointers, fibre-optic communication, cutting and welding, laboratory research and medical procedures.[12] Lasers in data-centre links are covered in how optical interconnects work.

    Safety classes and rules

    The FDA recognises four main hazard classes, I to IV, with subclasses IIa, IIIa and IIIb. The higher the class, the more powerful the laser and the greater the hazard. The FDA gives laser pointers as an example of Class IIIa, and medical lasers for eye surgery as an example of Class IV.[13] In the United States, laser products must meet FDA radiation safety performance standards in 21 CFR Parts 1010 and 1040. LEDs are not covered by the federal laser product standard.[14]

    Nobel Prizes and extreme lasers

    The 1964 Nobel Prize in Physics went to Charles Townes, Nicolay Basov and Aleksandr Prokhorov for fundamental work in quantum electronics that led to oscillators and amplifiers based on the maser-laser principle.[15]

    The 2018 prize honoured inventions in laser physics. Half went to Arthur Ashkin for optical tweezers and half to Gérard Mourou and Donna Strickland for a method of generating high-intensity, ultra-short optical pulses.[16] Optical tweezers use a laser beam to grab and hold tiny particles, atoms, molecules and even living cells, because the beam’s radiation pressure draws particles toward the point where the light is most intense.[17]

    Mourou and Strickland’s technique, chirped pulse amplification, was demonstrated in 1985. It stretches a short pulse in time to lower its peak power, amplifies it without damaging the amplifier, then compresses it again, making it extremely intense. It became standard for high-intensity lasers.[18] The Nobel Prize organisation notes that millions of eye operations are done every year with very sharp laser beams, and that ultrashort, intense pulses are used in eye surgery, data storage, making medical stents and precise cutting and drilling.[19]

    At the largest scale, the national-ignition-facility amplifies a pulse of about one billionth of a joule into 192 beams totalling 4 million joules of infrared light. That is converted to 2 million joules of ultraviolet light before it hits the target.[20] Why it does this is explained in how fusion works.

    Next in the crash course

    How DNA sequencing works and what it costs

    How DNA sequencing reads the order of bases, from Sanger to short and long reads, and how the cost of a human genome fell to a few hundred dollars.

    More in Physics

    Developing in Science & Energy

    Go deeper

    Questions readers ask

    What does "laser" stand for?

    Light Amplification by the Stimulated Emission of Radiation.[1]

    What makes laser light different from ordinary light?

    Ordinary light mixes many wavelengths travelling in different directions. Laser light is coherent, with photons of the same wavelength moving in the same direction, so the beam stays narrow and intense over long distances.[5]

    What decides a laser's colour?

    The amount of energy released when an excited electron drops to a lower energy level in the gain medium. Some lasers produce invisible ultraviolet or infrared light rather than visible light.[8][9]

    What are laser classes?

    The FDA recognises four main hazard classes, I to IV, with subclasses IIa, IIIa and IIIb. Higher classes are more powerful and more hazardous. The FDA gives laser pointers as an example of Class IIIa and lasers for eye surgery as an example of Class IV.[13]

    When was the first laser built?

    The first laser was demonstrated in 1960.[7]

    What did the 2018 Nobel Prize in Physics recognise?

    Inventions in laser physics. Half went to Arthur Ashkin for optical tweezers and half to Gérard Mourou and Donna Strickland for a way to generate high-intensity, ultra-short laser pulses.[16]

    Sources

    · 20 claims from 3 publishers

    Each numbered claim is a statement we checked against the sources listed with it. Tap a number in the text to see its sources in place.

    1. [1]

      Laser stands for Light Amplification by the Stimulated Emission of Radiation. confirmedas of 2026-11-08

    2. [2]

      In a laser, electrons in a material such as glass, crystal or gas absorb energy and jump to a higher-energy state; when they drop back, either spontaneously or when stimulated by light, they emit photons. confirmedas of 2026-11-08

      • NIF's Guide to How Lasers Work · Lawrence Livermore National Laboratory · Primary source · NIF's Guide to How Lasers Work, opening (retrieved 2026-11-08)
      • NIF's Guide to How Lasers Work · Lawrence Livermore National Laboratory · Primary source · NIF's Guide to How Lasers Work, opening (retrieved 2026-11-08)
    3. [3]

      A photon tuned to the excited electrons' energy stimulates them to emit photons of exactly the same wavelength, producing large numbers of photons with the same wavelength and direction. confirmedas of 2026-11-08

      • How NIF Works · Lawrence Livermore National Laboratory · Primary source · How NIF's Lasers Work (retrieved 2026-11-08)
    4. [4]

      Mirrors at each end of the gain medium bounce photons back and forth, each pass stimulating more identical photons, until the light is strong enough to leave through a partially reflective mirror as a beam. confirmedas of 2026-11-08

    5. [5]

      Ordinary light mixes many wavelengths travelling in different directions, while laser light is coherent, with photons at the same wavelength moving in the same direction, which lets a beam stay narrow and intense over long distances. confirmedas of 2026-11-08

      • NIF's Guide to How Lasers Work · Lawrence Livermore National Laboratory · Primary source · NIF's Guide to How Lasers Work, coherence paragraph (retrieved 2026-11-08)
      • NIF's Guide to How Lasers Work · Lawrence Livermore National Laboratory · Primary source · NIF's Guide to How Lasers Work, coherence paragraph (retrieved 2026-11-08)
      • Laser Products and Instruments · US Food and Drug Administration · Primary source · Description (retrieved 2026-11-08)
    6. [6]

      The FDA describes a laser as a device that stores energy from a source, such as an electrical discharge, a chemical reaction or intense light, and releases it as light. confirmedas of 2026-11-08

    7. [7]

      The first laser was demonstrated in 1960. confirmedas of 2026-11-08

    8. [8]

      The colour, or wavelength, of a laser's light is set by the amount of energy released when an excited electron drops to a lower energy level in the gain medium. confirmedas of 2026-11-08

      • NIF's Guide to How Lasers Work · Lawrence Livermore National Laboratory · Primary source · NIF's Guide to How Lasers Work, coherence paragraph (retrieved 2026-11-08)
    9. [9]

      Laser light need not be visible; lasers can produce visible light or invisible ultraviolet or infrared radiation. confirmedas of 2026-11-08

    10. [10]

      Like most large lasers, NIF uses intense flashes of white light from flashlamps to pump electrons in slabs of laser glass into a higher-energy state lasting about a millionth of a second. confirmedas of 2026-11-08

      • How NIF Works · Lawrence Livermore National Laboratory · Primary source · How NIF's Lasers Work (retrieved 2026-11-08)
    11. [11]

      Some lasers, such as ruby lasers, emit short pulses of light, while others, such as helium-neon gas lasers and liquid dye lasers, emit continuous light. confirmedas of 2026-11-08

    12. [12]

      The FDA lists everyday laser uses including optical disc players, bar code readers, printers and copiers, laser pointers, fibre-optic communication systems, cutting and welding, laboratory research and medical procedures. confirmedas of 2026-11-08

    13. [13]

      The FDA recognises four main laser hazard classes, I to IV, with subclasses IIa, IIIa and IIIb; higher classes are more powerful and more hazardous, and the FDA gives laser pointers as an example of Class IIIa and medical lasers for eye surgery as an example of Class IV. confirmedas of 2026-11-08

    14. [14]

      In the United States, laser products must meet FDA radiation safety performance standards in 21 CFR Parts 1010 and 1040, and LEDs are not subject to the federal laser product standard. confirmedas of 2026-11-08

    15. [15]

      The 1964 Nobel Prize in Physics went to Charles Townes, Nicolay Basov and Aleksandr Prokhorov for fundamental work in quantum electronics that led to oscillators and amplifiers based on the maser-laser principle. confirmedas of 1964-12-10

    16. [16]

      The 2018 Nobel Prize in Physics honoured inventions in laser physics, with half to Arthur Ashkin for optical tweezers and half to Gérard Mourou and Donna Strickland for a method of generating high-intensity, ultra-short optical pulses. confirmedas of 2018-10-02

    17. [17]

      Optical tweezers use a laser beam to grab and hold tiny particles, atoms, molecules and living cells, because the beam's radiation pressure draws particles toward the point where the light is most intense. confirmedas of 2018-10-02

    18. [18]

      Chirped pulse amplification, demonstrated in 1985, stretches a short laser pulse in time to lower its peak power, amplifies it without damaging the amplifier, then compresses it, making it extremely intense; it became standard for high-intensity lasers. confirmedas of 2018-10-02

    19. [19]

      The Nobel Prize organisation notes that millions of eye operations are performed every year with very sharp laser beams, and that ultrashort, intense pulses are used in eye surgery, data storage, making medical stents and precise cutting and drilling. confirmedas of 2018-10-02

    20. [20]

      The National Ignition Facility amplifies a laser pulse of about one billionth of a joule into 192 beams totalling 4 million joules of infrared light, converted to 2 million joules of ultraviolet light before it hits the target. confirmedas of 2026-11-08

      • How NIF Works · Lawrence Livermore National Laboratory · Primary source · How NIF Works, introduction (retrieved 2026-11-08)
      • How NIF Works · Lawrence Livermore National Laboratory · Primary source · How NIF Works (retrieved 2026-11-08)
      • How NIF Works · Lawrence Livermore National Laboratory · Primary source · How NIF Works (retrieved 2026-11-08)
    Revision history (1)
    1. Page created.

    Created Nov 8, 2026. Last reviewed by an editor on Nov 8, 2026. Next scheduled review: May 8, 2027.

    Cite this page

    "How lasers work." ContentLora, updated Nov 8, 2026. https://contentlora.com/explain/how-lasers-work

    Spotted an error? Suggest a correction or emailcorrections@contentlora.com.