Skip to content
ContentLora

    Tip: press / anywhere to search.

    Explainer

    The NACS (J3400) charging standard

    NACS is the charging plug Tesla developed, and SAE International has turned it into an open standard called J3400 after several automakers decided to adopt it.[1][2] One connector handles both AC and DC charging.[3] SAE's EV Coupler Task Force affirmed J3400 as a Recommended Practice in September 2024.[4] Until the switch is complete, CCS1 and J3400 cars will share the road, and some drivers will need adapters.[5][6]

    Editor reviewedUpdated Explainer18 claims · 100% primaryElectric and self-driving vehicles, Energy and climate
    Reading level: 4 passages differ; the rest is the same for everyone.

    This explainer covers the North American charging connector known as NACS and standardized as SAE J3400: where it came from, how the standard developed, what it supports and how the switch from CCS affects drivers. The three charging levels and US charger counts are covered in EV charging explained. Choose a reading level in each section.

    In the United States, an electric car’s charge port decides which of three DC fast-charging systems it can use: CCS, CHAdeMO or J3400.[7] J3400 is the standardized form of the plug Tesla developed, known as NACS.[8][1]

    From Tesla plug to open standard

    Tesla designed its own charging plug, called NACS.[1] After several other carmakers decided to use it, the standards body SAE International began turning it into an open standard named J3400.[1][8] The aim is that any carmaker or charger maker can use it.[9]

    The Joint Office of Energy and Transportation says SAE’s work on J3400 responded to multiple automakers’ decisions to adopt Tesla’s NACS connector.[1] SAE released a J3400 Technical Information Report in December 2023; the Federal Register describes J3400 as also known as the North American Charging Standard Electric Vehicle Coupler.[2] In September 2024 SAE’s EV Coupler Task Force voted to affirm J3400 as a Recommended Practice, which the Joint Office said brought it closer to publication in a format that can be cited in regulations, and the Joint Office welcomed its release on 9 October 2024.[4] The Joint Office described the result as the newly renamed North American Charging System.[10]

    What the connector does

    One J3400 plug works for every charging level, from home charging to Tesla’s Superchargers.[8] It uses the same pins for both kinds of charging current, AC and DC.[3] It is rated for high-power fast charging, and the Joint Office says it opens up new uses such as cars sending power back to the grid.[11]

    J3400 works across all charging levels, including Tesla’s Superchargers, and uses the same connector and pins for AC and DC.[8][3] By contrast, CCS (J1772 combo) lets one port accept Level 1, Level 2 and DC fast charging.[12] The J3400 connector is rated for DC supply at up to 1,000 volts and 1,000 amperes with adequate cooling. The Joint Office says it expands opportunities for vehicle-to-grid energy transfer and bring-your-own-cord charging, and that its support for a 277-volt AC supply could cut the cost of AC charging at some commercial sites.[11]

    Automakers and federal rules

    Several carmakers announced they would build cars with the J3400 port from as early as 2025, which lets non-Tesla EVs charge at Tesla stations.[13] In 2024 the federal government asked the public how its rules for federally funded chargers, which then required CCS plugs on fast chargers, should handle J3400.[14][15]

    Several manufacturers announced J3400 adoption from as early as 2025, opening Tesla stations to their EVs.[13] In March 2024 FHWA said J3400 had so far been used only in one automaker’s proprietary implementation, while several others planned full vehicle integration from 2025 and adapters from as early as 2024, and multiple charger makers had committed to it.[16] The FHWA minimum standards it quoted, at 23 CFR 680.106(c), required each federally funded DC fast charging port to have at least one permanently attached CCS Type 1 connector and each Level 2 port a J1772 connector.[15] FHWA and the Joint Office sought information on J3400 to inform a potential update to those standards.[14]

    The transition and adapters

    For a transition period, cars with both the older CCS1 port and the new J3400 port will be on the road.[5] In the meantime some drivers need an adapter to use more chargers; the Joint Office says to use only adapters supplied by your carmaker for your car.[6] Every Tesla already comes with an adapter for non-Tesla Level 2 chargers.[17]

    The Joint Office expects a transition period in which both CCS1 and J3400 connectors are prevalent on vehicles in use.[5] EVs may need adapters to reach more chargers, and until certified adapters are available it advises using only manufacturer-supplied adapters for the specific vehicle, noting that not all adapters work with all vehicles or chargers.[6] Teslas ship with a J1772 adapter for non-Tesla Level 2 equipment.[17] The stated end goal is that, once J3400 is in vehicles and chargers, any vehicle can charge at any location with little or no need for adapters.[18]

    Charging an EV at home

    How home EV charging works: Level 1 vs Level 2, when a 240-volt charger is worth it, installation, permits and electrical codes, and electricity costs.

    More in EVs & robotaxis

    Developing in Science & Energy

    Questions readers ask

    What is the difference between NACS and J3400?

    NACS is the connector Tesla developed. J3400 is the open SAE standard based on it, which any vehicle or charging-equipment maker can use, manufacture or deploy.[1][8][9]

    Can non-Tesla EVs use Tesla Superchargers?

    Opening up J3400 gave more EVs access to Tesla's Supercharger network. Several automakers announced they would adopt the J3400 connector from as early as 2025.[1][13]

    How is J3400 different from CCS?

    CCS, also called J1772 combo, lets one charge port accept Level 1, Level 2 and DC fast charging. J3400 uses the same connector and pins for both AC and DC charging.[12][3]

    Do I need an adapter?

    During the transition, EVs may need an adapter to reach more chargers. Until certified adapters are available, the Joint Office advises using only adapters supplied by your vehicle maker for your vehicle.[6]

    How powerful can J3400 charging be?

    The connector is rated for DC supply at up to 1,000 volts and up to 1,000 amperes with adequate cooling.[11]

    Sources

    · 18 claims from 3 publishers

    Each numbered claim is a statement we checked against the sources listed with it. Tap a number in the text to see its sources in place.

    1. [1]

      SAE developed J3400 as an open standard in response to multiple automakers' decisions to adopt the NACS connector developed by Tesla, and opening it up gave more EVs access to Tesla's Supercharger network. confirmedas of 2026-11-14

    2. [2]

      J3400 is the SAE EV charging connector standard also known as the North American Charging Standard (NACS) coupler; SAE published a Technical Information Report on it in December 2023. confirmedas of 2026-11-14

    3. [3]

      J3400 uses the same connector and pins for both AC and DC charging. confirmedas of 2026-11-14

    4. [4]

      In September 2024 SAE's EV Coupler Task Force voted to affirm J3400 as a Recommended Practice, which the Joint Office said brought the standard closer to publication in a format that can be cited in regulations; the Joint Office of Energy and Transportation welcomed the Recommended Practice's release on 9 October 2024. confirmedas of 2026-11-14

    5. [5]

      During the move to J3400 there will be a transition period in which both CCS1 and J3400 connectors are common on vehicles on the road. confirmedas of 2026-11-14

    6. [6]

      During the transition EVs may need an adapter to reach more chargers; until certified adapters are available, the Joint Office advises using only adapters supplied by the vehicle maker for that vehicle, as instructed. confirmedas of 2026-11-14

    7. [7]

      There are three DC fast charging systems in the United States, set by the vehicle's charge port: SAE Combined Charging System (CCS), CHAdeMO and J3400. confirmedas of 2026-11-07

    8. [8]

      SAE International is standardizing the J3400 connector, based on Tesla's NACS design, which works for all charging levels including Tesla's Superchargers. confirmedas of 2026-11-07

    9. [9]

      The SAE J3400 standard is meant to let any vehicle or charging-equipment supplier or manufacturer use, manufacture or deploy the connector. confirmedas of 2026-11-14

    10. [10]

      The Joint Office said the J3400 Recommended Practice lets any supplier or manufacturer use and deploy what it called the newly renamed North American Charging System. confirmedas of 2026-11-14

    11. [11]

      The J3400 connector is rated for DC supply at up to 1,000 volts and up to 1,000 amperes with adequate cooling; the Joint Office says it expands opportunities for vehicle-to-grid energy transfer and bring-your-own-cord charging, and that by supporting a 277-volt AC supply it could reduce the cost of AC charging installations at some commercial sites. confirmedas of 2026-11-14

    12. [12]

      The CCS connector (SAE J1772 combo) lets one charge port accept Level 1, Level 2 and DC fast charging, and most EV models on the market can charge with it. confirmedas of 2026-11-07

    13. [13]

      Several automakers announced they would adopt the J3400 connector from as early as 2025, letting non-Tesla EVs charge at Tesla stations. confirmedas of 2026-11-07

    14. [14]

      In March 2024 FHWA, with the Joint Office, asked for public information on J3400 to inform a potential update to its minimum charger standards. confirmedas of 2026-11-14

    15. [15]

      FHWA's minimum standards for federally funded chargers (23 CFR 680.106(c)), as quoted in its March 2024 request for information, required each DC fast charging port to have at least one permanently attached CCS Type 1 connector and each AC Level 2 port a permanently attached J1772 connector. confirmedas of 2026-11-14

    16. [16]

      As of March 2024, FHWA said J3400 had been used only in one automaker's proprietary implementation and charging network, while several other automakers had announced plans to adopt it with full vehicle integration from 2025 and through adapters as early as 2024, and multiple charger makers had committed to it. confirmedas of 2026-11-14

    17. [17]

      All Tesla vehicles come with a J1772 adapter for non-Tesla Level 2 equipment. confirmedas of 2026-11-07

    18. [18]

      The Joint Office says that once J3400 is implemented in EVs and chargers, consumers will be able to charge any vehicle at any location, reducing or removing the need for adapters. confirmedas of 2026-11-14

    Revision history (1)
    1. Page created.

    Created Nov 14, 2026. Last reviewed by an editor on Nov 14, 2026. Next scheduled review: May 14, 2027.

    Cite this page

    "The NACS (J3400) charging standard." ContentLora, updated Nov 14, 2026. https://contentlora.com/explain/nacs-charging-standard-explained

    Spotted an error? Suggest a correction or emailcorrections@contentlora.com.