Skip to content
ContentLora

    Tip: press / anywhere to search.

    Explainer

    How earthquakes are measured: magnitude, intensity and alerts

    Earthquakes are measured in two different ways: magnitude, a single number for the size of the earthquake, and intensity, the shaking felt at each place, which varies with distance and ground conditions.[1] Today the USGS relies on moment magnitude, based on how much a fault slipped, rather than the original Richter scale.[2][3] After a quake, USGS tools map the shaking (ShakeMap), estimate losses (PAGER) and, on the US West Coast, send warnings that can arrive before strong shaking does (ShakeAlert).[4][5][6]

    Editor reviewedUpdated Explainer21 claims · 100% primaryWeather and natural hazards, Science
    Reading level: 1 passage differs; the rest is the same for everyone.

    This explainer covers how earthquakes are recorded and rated, and the main US Geological Survey tools used after a quake. It does not cover earthquake preparedness in depth; follow your national or local emergency agency for that.

    Seismometers: recording the waves

    When a fault ruptures, it sends vibrations through the Earth. Seismometers record those vibrations, and sensitive instruments can pick up strong earthquakes from anywhere in the world.[7] Their records tell seismologists when and where an earthquake happened and how big it was.[7]

    A rupture radiates several wave types. Primary (P) waves are fastest, about 3.7 miles per second, and generally do not cause strong shaking; secondary (S) waves and surface waves travel about 2.5 miles per second and are generally more damaging.[8] Modern seismometers amplify and record ground motion as a function of time, and an event’s origin time, location and magnitude are all derived from these records.[7] The USGS National Earthquake Information Center reports over 30,000 earthquakes a year, of which about 25 cause significant damage, injuries or deaths.[9]

    Magnitude: from Richter to moment magnitude

    Magnitude is the size of an earthquake, and each earthquake has just one.[1] The scale is logarithmic: each whole-number step is a tenfold increase in the amplitude recorded on a seismogram and about 32 times more energy.[10]

    Charles F. Richter introduced the idea of magnitude in 1935, originally only for California earthquakes within 600 km of a particular type of seismograph.[11] Scales based only on wave amplitude turned out to misjudge very large earthquakes: the body-wave magnitude saturates at about 6.5 and the 20-second surface-wave magnitude at about 8.3.[12] The USGS now uses the Richter (local) magnitude only for small, locally recorded quakes and considers moment magnitude more accurate for all others.[2]

    Moment magnitude starts from the seismic moment, which is the product of the rock’s rigidity, the area of fault that slipped and the slip distance; the moment is then converted to a magnitude designed to match the Richter scale where the two overlap.[3] The USGS computes a W-phase moment magnitude (Mww) for every earthquake of magnitude 5.0 or larger worldwide and treats it as its authoritative magnitude when available.[13]

    Try it Compare two earthquakes

    Pick two magnitudes to see how much more ground motion and energy the larger one has. The magnitudes are hypothetical.

    How much bigger one earthquake is than another, by the difference in magnitude. Energy figures are approximate.

    Magnitude differenceExampleGround motion (amplitude)Energy released
    16 vs 510×about 32×
    27 vs 5100×about 1,000×
    38 vs 51,000×about 33,000×

    Rules and figures this demo uses

    • Seismogram amplitude per whole magnitude step: 10×[10]
    • Energy released per whole magnitude step: about 32×[10]
    • An earthquake has one magnitude, but the shaking varies from place to place[1]

    Energy figures compound the "about 32 times" step, so they are approximate.

    Intensity: what people feel

    Intensity measures the shaking at a particular place, which varies with distance from the source, the ground and other factors.[1] The United States uses the Modified Mercalli Intensity (MMI) scale, developed in 1931 by Harry Wood and Frank Neumann; it uses Roman numerals and ranks observed effects rather than having a mathematical basis.[14] The lower levels describe how people feel the shaking, the higher levels are based on structural damage, and engineers usually contribute to ratings of VIII or above.[15]

    Japan takes a different approach: the Japan Meteorological Agency measures intensity with instruments on the ground or the ground floor of low-rise buildings, and its scale splits some levels into “lower” and “upper”, such as “6 Lower”, at which it is difficult to remain standing.[16]

    After the shaking: ShakeMap and PAGER

    ShakeMap, produced by the USGS with regional seismic networks, gives near-real-time maps of ground motion and shaking intensity after significant earthquakes, and is used for emergency response, recovery and planning.[4] It combines recorded ground motion, “Did You Feel It?” reports from the public, a map of how local soil and rock amplify shaking, and equations for how shaking fades with distance, then converts the result into an intensity map.[17]

    PAGER (Prompt Assessment of Global Earthquakes for Response) estimates shaking with ShakeMap methods, then compares the number of people exposed to each level of shaking with country-specific loss models drawn from past earthquakes, and issues a colour-coded alert: green (no response needed), yellow (local or regional), orange (national) or red (international).[5] Results are generally available within 30 minutes of a significant earthquake, and shaking estimates typically improve as more data arrive.[18]

    Early warning: ShakeAlert

    ShakeAlert is not earthquake prediction. The USGS-operated system detects an earthquake that has already started, estimates its location, magnitude and shaking intensity, and issues a ShakeAlert Message if alert thresholds are met.[6] Because alerts travel far faster than the damaging S-waves and surface waves, people farther from the origin have more time to receive an alert before shaking arrives.[8]

    ShakeAlert-powered alerts reach the public through other channels, including FEMA Wireless Emergency Alerts, and can trigger automated actions such as slowing trains and closing valves; phone apps and Android alert people expected to feel MMI III or stronger shaking in earthquakes of magnitude 4.5 and above.[19] In 2022 the USGS said over 50 million people in California, Oregon and Washington could receive these warnings, with a network of over 1,300 sensors and a goal of 1,675 by the end of 2025.[20] Similar early warning systems operate in Mexico, Japan, Turkey, Romania, China, Italy and Taiwan.[21]

    See also How hurricanes form and How weather forecasts work.

    Next in the crash course

    Questions readers ask

    What is the difference between magnitude and intensity?

    Magnitude is the size of the earthquake and there is only one value per quake. Intensity describes the shaking at a particular place, which varies with distance, ground type and other factors.[1]

    Is the Richter scale still used?

    Only for small, locally recorded earthquakes. For all other earthquakes the USGS says moment magnitude (Mw) is a more accurate measure.[2]

    How much bigger is a magnitude 7 than a magnitude 6?

    Each whole-number step is a tenfold increase in the amplitude recorded on a seismogram and about 32 times more energy released.[10]

    Can ShakeAlert predict earthquakes?

    No. ShakeAlert detects an earthquake that has already started and estimates its location, magnitude and shaking, so alerts can arrive before the slower, damaging waves.[6][8]

    What do the PAGER alert colours mean?

    PAGER's green, yellow, orange and red alerts suggest no response, a local or regional response, a national response, or an international response, based on estimated fatalities and economic losses.[5]

    How many earthquakes happen each year?

    The USGS National Earthquake Information Center reports over 30,000 earthquakes a year, about 25 of which cause significant damage, injuries or deaths.[9]

    Sources

    · 21 claims from 2 publishers

    Each numbered claim is a statement we checked against the sources listed with it. Tap a number in the text to see its sources in place.

    1. [1]

      An earthquake has a single magnitude, but the shaking it causes varies from place to place with distance, ground type and other factors. confirmedas of 2026-11-07

    2. [2]

      The USGS says the Richter scale is no longer commonly used except for small, locally recorded earthquakes, and that moment magnitude (Mw) is a more accurate measure for all others. confirmedas of 2026-11-07

    3. [3]

      Moment magnitude is based on the seismic moment, which depends on the rigidity of the rock, the area of the fault that slipped and the distance it moved; the moment is converted to a magnitude designed to roughly match the Richter scale where they overlap. confirmedas of 2026-11-07

    4. [4]

      USGS ShakeMaps, produced with regional seismic networks, are near-real-time maps of ground motion and shaking intensity after significant earthquakes, used for response, recovery and planning. confirmedas of 2026-11-07

      • ShakeMap · U.S. Geological Survey · Primary source (retrieved 2026-11-07)
    5. [5]

      USGS PAGER (Prompt Assessment of Global Earthquakes for Response) uses ShakeMap methods to estimate shaking, then estimates fatalities and economic losses by combining the population exposed to each shaking level with country-specific loss models, issuing green, yellow, orange or red alerts. confirmedas of 2026-11-07

      • PAGER background · U.S. Geological Survey · Primary source (retrieved 2026-11-07)
      • PAGER background · U.S. Geological Survey · Primary source (retrieved 2026-11-07)
      • PAGER background · U.S. Geological Survey · Primary source (retrieved 2026-11-07)
    6. [6]

      ShakeAlert is not earthquake prediction; it detects an earthquake that has already started, estimates its location, magnitude and shaking intensity, and issues a message if alert thresholds are met. confirmedas of 2026-11-07

    7. [7]

      The USGS says seismometers record the vibrations of earthquakes travelling through the Earth, and that sensitive instruments can detect strong earthquakes anywhere in the world; modern systems amplify and record ground motion as a function of time, and these data give an earthquake's time, location and magnitude. confirmedas of 2026-11-07

    8. [8]

      The USGS says P-waves travel about 3.7 miles per second and generally do not cause strong shaking, while the more damaging S-waves and surface waves travel about 2.5 miles per second, and that because telecommunications are many times faster than seismic waves, people farther from the origin get more warning. confirmedas of 2026-11-07

    9. [9]

      The USGS National Earthquake Information Center reports over 30,000 earthquakes a year, of which about 25 cause significant damage, injuries or deaths. confirmedas of 2026-11-07

      • PAGER background · U.S. Geological Survey · Primary source (retrieved 2026-11-07)
    10. [10]

      Each whole-number step in magnitude is a tenfold increase in the amplitude measured on a seismogram and about 32 times more energy released. confirmedas of 2026-11-07

    11. [11]

      Charles F. Richter introduced earthquake magnitude in 1935, originally only for California earthquakes within 600 km of a particular type of seismograph. confirmedas of 2026-11-07

    12. [12]

      The USGS says magnitude scales based only on waveform amplitude overestimate or underestimate very large earthquakes; for example the body-wave magnitude saturates at about 6.5 and the 20-second surface-wave magnitude at about 8.3. confirmedas of 2026-11-07

    13. [13]

      The USGS computes a W-phase moment magnitude (Mww) for all earthquakes of magnitude 5.0 or larger worldwide and treats it as its authoritative magnitude when available. confirmedas of 2026-11-07

      • Magnitude Types · U.S. Geological Survey · Primary source (retrieved 2026-11-07)
      • Magnitude Types · U.S. Geological Survey · Primary source (retrieved 2026-11-07)
    14. [14]

      The Modified Mercalli Intensity scale used in the United States was developed in 1931 by Harry Wood and Frank Neumann; it uses Roman numerals and ranks the observed effects of shaking rather than having a mathematical basis. confirmedas of 2026-11-07

    15. [15]

      Lower MMI values describe how people feel the shaking, while higher values are based on observed structural damage, with engineers usually contributing to assignments of VIII or above. confirmedas of 2026-11-07

    16. [16]

      Japan's Meteorological Agency measures seismic intensity with instruments, using intensity meters on the ground or the first floor of low-rise buildings, and its scale includes split levels such as "5 Lower" and "6 Lower". confirmedas of 2026-11-07

    17. [17]

      ShakeMap combines recorded ground motions, "Did You Feel It?" reports, a site-amplification map based on topographic slope and attenuation equations, then converts the estimated ground motions into a map of seismic intensity. confirmedas of 2026-11-07

      • PAGER background · U.S. Geological Survey · Primary source (retrieved 2026-11-07)
      • PAGER background · U.S. Geological Survey · Primary source (retrieved 2026-11-07)
      • PAGER background · U.S. Geological Survey · Primary source (retrieved 2026-11-07)
      • PAGER background · U.S. Geological Survey · Primary source (retrieved 2026-11-07)
    18. [18]

      PAGER results are generally available within 30 minutes of a significant earthquake, and information on the extent of shaking typically improves as more sensor data and reported intensities arrive. confirmedas of 2026-11-07

      • PAGER background · U.S. Geological Survey · Primary source (retrieved 2026-11-07)
      • PAGER background · U.S. Geological Survey · Primary source (retrieved 2026-11-07)
    19. [19]

      ShakeAlert-powered alerts are delivered by other public and private means, including FEMA Wireless Emergency Alerts, and ShakeAlert messages can trigger automated actions such as slowing trains and closing valves; phone apps and Android alert people expected to feel MMI III shaking or more for earthquakes of magnitude 4.5 and larger. confirmedas of 2026-11-07

    20. [20]

      USGS said in 2022 that over 50 million people in Washington, Oregon and California could receive ShakeAlert warnings, from a network of over 1,300 sensors with a goal of 1,675 by the end of 2025. confirmedas of 2022-08-25

    21. [21]

      The USGS notes that earthquake early warning systems also operate in Mexico, Japan, Turkey, Romania, China, Italy and Taiwan. confirmedas of 2026-11-07

    Revision history (2)
    1. Added an interactive magnitude comparison.
    2. Page created.

    Created Nov 7, 2026. Last reviewed by an editor on Nov 8, 2026. Next scheduled review: Mar 7, 2027.

    Cite this page

    "How earthquakes are measured: magnitude, intensity and alerts." ContentLora, updated Nov 8, 2026. https://contentlora.com/explain/how-earthquakes-are-measured

    Spotted an error? Suggest a correction or emailcorrections@contentlora.com.