Explainer
The US Cyber Trust Mark explained: security labels for smart devices
The U.S. Cyber Trust Mark is the FCC's voluntary cybersecurity label for wireless consumer smart devices, set up in an order adopted March 14, 2024.[1] The label pairs the mark with a QR code that leads to a registry of security details, such as how long the maker promises security updates.[2][3] Its criteria come from NIST's baseline for consumer IoT products.[4][5] The program's first lead administrator, UL Solutions, withdrew in December 2025, and the FCC picked ioXt Alliance to replace it in April 2026.[6][7]
This explainer covers how the FCC’s labeling program is designed and where its rollout stood as of the FCC’s April 2026 notices. It is not a product recommendation. A label signals that a product met a baseline when it was certified; check the registry entry for the update commitment.
What the label is
The U.S. Cyber Trust Mark is a label that smart-device makers can choose to put on their products to show they meet a basic cybersecurity standard. The Federal Communications Commission (FCC) set up the program for wireless consumer “Internet of Things” (IoT) products in rules adopted on March 14, 2024.[1]
The label has two parts: the Cyber Trust Mark logo and a QR code that you can scan for more detail about the product.[2] The label is pass or fail. A product either qualifies to carry it or it doesn’t.[8]
The Report and Order in PS Docket 23-239 was adopted March 14, 2024 and took effect August 29, 2024.[1] It covers IoT “products” rather than bare devices: one or more devices plus the components needed to use them, following NIST’s definition.[9] The FCC chose a single binary label with layering, arguing that a mark signaling minimum requirements would be simplest for consumers, with the QR code supplying the detail.[8][2]
Exclusions: FDA-regulated medical devices, motor vehicles and motor vehicle equipment (left to NHTSA), wired devices in this first phase (the FCC grounds it in its section 302 authority over devices that emit radio frequency energy), and equipment on the FCC’s Covered List.[10]
The security criteria
The standard behind the label comes from the National Institute of Standards and Technology (NIST). NIST’s baseline for home and personal smart devices lists the security features such products commonly need, and applies them to the whole product, not just the gadget itself.[5]
The NIST criteria cover six product features: identifying the product, configuring it, protecting data, controlling access, updating software, and noticing security problems. They also cover four duties for the maker, such as providing documentation and answering security questions.[4]
NIST IR 8425 (September 2022) documents the consumer profile of NIST’s IoT core baseline, written as outcomes for the entire IoT product.[5] NIST developed it in response to Executive Order 14028.[11] The criteria the FCC adopted list six technical capabilities (asset identification, product configuration, data protection, interface access control, software update, cybersecurity state awareness) and four developer activities (documentation, information and query reception, information dissemination, product education and awareness).[4] The FCC recognizes testing labs accredited to ISO/IEC 17025.[12]
What the QR code tells you
Scanning the QR code opens a registry entry for the product. It has to tell you how to change the default password, or say that it can’t be changed. It also has to say whether security updates install automatically, and how long the maker promises to keep fixing serious security flaws. If the device is no longer supported, the entry has to say so.[3]
Makers who use the label commit to looking for critical vulnerabilities and promptly releasing fixes until that support date.[13]
The order requires a common API so the decentralized registry can display a fixed set of fields, including default-password instructions, whether updates are automatic, and the minimum support period, or else a statement that the device is unsupported.[3] Other fields name the testing lab and disclose whether the manufacturer maintains a hardware or software bill of materials (HBOM/SBOM).[14] Applicants attest that, until the disclosed support end date, they will identify critical vulnerabilities and promptly issue software updates.[13]
Who runs it
The FCC owns the program but relies on outside organizations to run it. These administrators check that a product was tested by an accredited lab before letting the maker use the label.[12] By December 2024 the FCC had conditionally approved 11 of these administrators and picked UL Solutions to lead them.[15]
Under the FCC as program owner, Cybersecurity Label Administrators (CLAs) certify that products were tested by an accredited lab.[12] The Bureau conditionally approved 11 CLAs and named UL Solutions Lead Administrator in December 2024.[15] In January 2026 the FCC said conditional approval does not let a CLA certify products until it is accredited to ISO/IEC 17065 under the FCC program scope.[16] For the FCC itself, see Federal Communications Commission.
A change of administrator, 2025–2026
UL Solutions withdrew as Lead Administrator effective December 19, 2025, and one CLA had already withdrawn in August 2025.[6] MeriTalk and Nextgov reported that the withdrawal followed reports of an FCC investigation into UL’s alleged ties to China. UL’s own withdrawal letter cited “other considerations” without elaborating.[17]
In January 2026 the FCC opened a window for Lead Administrator applications from January 7 to 28, and a new window for CLA applications from January 27 to February 24.[18] On April 13, 2026, it selected ioXt Alliance, a US-based non-profit, as the new Lead Administrator.[7] The FCC said that under Chairman Brendan Carr it had worked to advance the program with a greater emphasis on national security.[19] ioXt is to work with stakeholders on consumer outreach and recommend more standards, testing procedures and label design.[20] The previous administrator’s first recommendations were under FCC staff review and due to go out for public comment.[20] For other ways to protect accounts and devices, see passkeys explained and how data breaches happen.
Read next
Federal Communications Commission (FCC): powers, structure, rulings
The FCC explained: what the US communications regulator oversees, how its five commissioners are chosen, spectrum auctions, and the 2025 court rulings.
More in Consumer tech
Questions readers ask
What is the U.S. Cyber Trust Mark?
It is a voluntary FCC cybersecurity labeling program for wireless consumer Internet of Things products. The FCC adopted the rules on March 14, 2024, and they took effect on August 29, 2024.[1]
Do manufacturers have to use it?
No. Participation is voluntary, and the label is binary, so a product either qualifies to carry it or does not.[1][8]
What does the QR code on the label show?
It links to a registry that must include how to change the default password, whether security updates are automatic, and the date until which the maker promises to fix critical vulnerabilities, or a statement that the device is unsupported.[2][3]
Which products are left out?
FDA-regulated medical devices, motor vehicles and motor vehicle equipment, wired devices for now, and equipment on the FCC's Covered List are excluded.[10]
Who checks that a product meets the standard?
The FCC owns the program. Third-party administrators certify that labeled products were tested by an accredited lab, and the FCC said in January 2026 that administrators cannot certify products until they are accredited to ISO/IEC 17065 under the program's scope.[12][16]
Sources
· 20 claims from 5 publishers
Each numbered claim is a statement we checked against the sources listed with it. Tap a number in the text to see its sources in place.
- [1]
The FCC established a voluntary cybersecurity labeling program for wireless consumer Internet of Things (IoT) products in an order adopted March 14, 2024, effective August 29, 2024. confirmedas of 2024-07-30
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Summary (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Supplementary information (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Dates (retrieved 2026-11-08)
- [2]
The FCC IoT label pairs the Cyber Trust Mark logo with a QR code that links to a decentralized, publicly available registry of more detailed security information about the product. confirmedas of 2024-07-30
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Summary (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Introduction (retrieved 2026-11-08)
- [3]
The FCC requires a common API that gives access to a set of manufacturer information in the registry reached through the QR code, including how to change the default password, whether security updates are automatic, and the date until which the maker promises to fix critical vulnerabilities (the minimum support period), or a statement that the device is unsupported. confirmedas of 2024-07-30
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Registry (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Registry (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Registry (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Registry (retrieved 2026-11-08)
- [4]
The NIST criteria behind the program list six product capabilities (asset identification, product configuration, data protection, interface access control, software update and cybersecurity state awareness) and four developer activities (documentation, information and query reception, information dissemination, and product education and awareness). confirmedas of 2024-07-30
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Standards (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Standards (retrieved 2026-11-08)
- [5]
NIST IR 8425 (September 2022) sets out the consumer profile of NIST's IoT core baseline, the cybersecurity capabilities commonly needed for IoT products for home or personal use, phrased as outcomes that apply to the entire product. confirmedas of 2022-09-20
- NIST IR 8425: Profile of the IoT Core Baseline for Consumer IoT Products · National Institute of Standards and Technology · Primary source · 2022-09-20 · Abstract (retrieved 2026-11-08)
- NIST IR 8425: Profile of the IoT Core Baseline for Consumer IoT Products · National Institute of Standards and Technology · Primary source · 2022-09-20 · Abstract (retrieved 2026-11-08)
- [6]
UL Solutions withdrew as Lead Administrator effective December 19, 2025, and one CLA had already withdrawn effective August 15, 2025. confirmedas of 2026-01-26
- DA 26-75: Public notice on the Cyber Trust Mark lead administrator · Federal Communications Commission · Primary source · Page 1 (retrieved 2026-11-08)
- DA 26-75: Public notice on the Cyber Trust Mark lead administrator · Federal Communications Commission · Primary source · Page 1, footnote 5 (letter from CTIA Certification LLC) (retrieved 2026-11-08)
- [7]
On April 13, 2026 the FCC selected ioXt Alliance, a US-based non-profit, as the new Lead Administrator of the U.S. Cyber Trust Mark Program. confirmedas of 2026-04-13
- DA 26-354: Public Safety and Homeland Security Bureau selects new Lead Administrator for the U.S. Cyber Trust Mark Program · Federal Communications Commission · Primary source · 2026-04-13 · Paragraph 1 (retrieved 2026-11-08)
- DA 26-354: Public Safety and Homeland Security Bureau selects new Lead Administrator for the U.S. Cyber Trust Mark Program · Federal Communications Commission · Primary source · 2026-04-13 · Paragraph 2 (retrieved 2026-11-08)
- [8]
The FCC chose a single binary label, meaning a product either qualifies to carry it or does not, saying a mark signaling minimum cybersecurity requirements would be simplest for consumers. confirmedas of 2024-07-30
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Label design (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Label design (retrieved 2026-11-08)
- [9]
The FCC applies the program to IoT "products", defined as one or more IoT devices plus the other components needed to use them, following NIST's definition. confirmedas of 2024-07-30
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Scope (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Scope (retrieved 2026-11-08)
- [10]
The program excludes FDA-regulated medical devices, motor vehicles and motor vehicle equipment, wired IoT devices (initially), and equipment on the FCC's Covered List. confirmedas of 2024-07-30
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Scope (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Scope (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Scope (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Scope (retrieved 2026-11-08)
- [11]
NIST developed the consumer IoT profile as part of its response to Executive Order 14028. confirmedas of 2022-09-20
- NIST IR 8425: Profile of the IoT Core Baseline for Consumer IoT Products · National Institute of Standards and Technology · Primary source · 2022-09-20 · Abstract (retrieved 2026-11-08)
- [12]
The FCC is the program owner, third-party administrators certify that labeled products were tested by an accredited lab, and the FCC recognizes testing labs accredited to ISO/IEC 17025. confirmedas of 2024-07-30
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Administrative framework (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Administrative framework (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Testing labs (retrieved 2026-11-08)
- [13]
Applicants must commit that, until the support end date disclosed in the registry, they will look for critical vulnerabilities and promptly issue software updates fixing them. confirmedas of 2024-07-30
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Applicant attestations (retrieved 2026-11-08)
- [14]
The registry must also name the testing lab and disclose whether the maker keeps a hardware or software bill of materials. confirmedas of 2024-07-30
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Registry (retrieved 2026-11-08)
- Cybersecurity Labeling for Internet of Things (final rule) · Federal Register (Federal Communications Commission) · Primary source · 2024-07-30 · Registry (retrieved 2026-11-08)
- [15]
By December 2024 the FCC had conditionally approved 11 Cybersecurity Label Administrators (CLAs) and selected UL Solutions as Lead Administrator. confirmedas of 2026-01-26
- DA 26-75: Public notice on the Cyber Trust Mark lead administrator · Federal Communications Commission · Primary source · Page 1 (retrieved 2026-11-08)
- UL Solutions Withdraws as Lead Administrator for FCC's Cyber Trust Mark Program · MeriTalk · Secondary source · Article body (retrieved 2026-11-08)
- [16]
The FCC said conditionally approved CLAs cannot certify products to use the label until they are accredited to ISO/IEC 17065 under the FCC program scope. confirmedas of 2026-01-26
- DA 26-75: Public notice on the Cyber Trust Mark lead administrator · Federal Communications Commission · Primary source · Page 2 (retrieved 2026-11-08)
- DA 26-75: Public notice on the Cyber Trust Mark lead administrator · Federal Communications Commission · Primary source · Page 2 (retrieved 2026-11-08)
- [17]
MeriTalk and Nextgov reported that UL Solutions' withdrawal followed reports of an FCC investigation into the company's alleged ties to China; UL's withdrawal letter cited "other considerations" without elaborating. reportedas of 2026-04-13
- UL Solutions Withdraws as Lead Administrator for FCC's Cyber Trust Mark Program · MeriTalk · Secondary source · Article body (retrieved 2026-11-08)
- FCC selects ioXt Alliance to lead cyber labeling program · Nextgov/FCW · Secondary source · 2026-04-13 · Article body (retrieved 2026-11-08)
- UL Solutions Withdraws as Lead Administrator for FCC's Cyber Trust Mark Program · MeriTalk · Secondary source · Quoted UL Solutions letter of Dec. 19, 2025 (retrieved 2026-11-08)
- [18]
In January 2026 the FCC opened a filing window for Lead Administrator applications (January 7 to 28) and a new window for CLA applications (January 27 to February 24, 2026). confirmedas of 2026-01-26
- DA 26-75: Public notice on the Cyber Trust Mark lead administrator · Federal Communications Commission · Primary source · Page 1 (retrieved 2026-11-08)
- DA 26-75: Public notice on the Cyber Trust Mark lead administrator · Federal Communications Commission · Primary source · Page 2 (retrieved 2026-11-08)
- [19]
The FCC's April 2026 release said that under Chairman Brendan Carr the Commission had worked to advance the program with a greater emphasis on national security. confirmedas of 2026-04-13
- FCC news release on the U.S. Cyber Trust Mark Lead Administrator · Federal Communications Commission · Primary source · News release (retrieved 2026-11-08)
- [20]
The FCC said ioXt would work with stakeholders on a consumer outreach campaign and recommend additional cybersecurity standards, testing procedures and label design, and that the previous Lead Administrator's initial recommendations were under staff review and would be put out for public comment. confirmedas of 2026-04-13
- FCC news release on the U.S. Cyber Trust Mark Lead Administrator · Federal Communications Commission · Primary source · News release, Additional Information (retrieved 2026-11-08)
- DA 26-354: Public Safety and Homeland Security Bureau selects new Lead Administrator for the U.S. Cyber Trust Mark Program · Federal Communications Commission · Primary source · 2026-04-13 · Paragraph 3 (retrieved 2026-11-08)
Revision history (1)
- Page created.
Created Nov 8, 2026. Last reviewed by an editor on Nov 8, 2026. Next scheduled review: Feb 8, 2027.
Cite this page
"The US Cyber Trust Mark explained: security labels for smart devices." ContentLora, updated Nov 8, 2026. https://contentlora.com/explain/cyber-trust-mark-explained
Spotted an error? Suggest a correction or emailcorrections@contentlora.com.